VF-18 Vertical-flow film fills
|
Standard dimensions: |
2.400 x 300 x 300 / 600 (Length Width Height) Different dimensions are available upon request |
|
Channel opening: |
18 mm |
|
Effective surface area: |
140 m²/m³ |
|
Channel structure: |
Vertical, flat |
|
Material: |
Polypropylen (PP), Polyvinylchlorid (PVC) |
|
Operating temperatures: |
PP < 75° C - constant - , max 80° C - short term - (measured water discharge at the distribution pipe ) |
|
Free volume: |
> 97 % |
|
Flammability rating: |
ASTM E 84, UL 94, DIN 4102-B2 |
Features
High-performance trickle fill installations are characterised by their high mechanical strength.
This strength is determined by two special factors, on the one hand by the mechanical and extremely stable connection technology and on the other hand by the specially structured fill design.
The VF 18 circular fill can be produced in almost any strength class up to 80 kg / m³, so that, depending on the customer's requirements, the optimum design is available to suit the application. Particular attention is paid to environmental compatibility (solvent-free), simple and stable processing through our own welding technology as well as adhering to every fire protection requirement.
The welding machines which we developed enable us to process fills which are suitable for permanent use as well as on construction site production.
Due to the optimised fill design with a free volume > 97%, these fills can be used for slightly contaminated water qualities as well as highly contaminated water qualities.
Downloads
Features
- High flexibility according to installation situation
Variable dimensions and different strength classes
- Optimised heat and mass transfer
Large effective surfaces and therefore high efficiency
- High mechanical stability and high load bearing capacity
Stable connection points and wall strengths ensure accessibility
- High durability
Use of age-resistant, effective materials
- Complies with the highest fire protection regulations
Own formula using highly effective additives